Brand
Intersil &Texas
Usage/Application
Electronics
Mounting Type
DIP
Part Number
ICL 7106
Type
Non-Leaded, Leaded
Certification
RoHS
Package
PDIP-40
Temperature
0 C TO +70 C
We also have the below mentioned products availabe with us :
ICL7211 ICL7126 ICL7555
• Guaranteed zero reading for 0V input on all scales
• True polarity at zero for precise null detection
• 1pA typical input current
• True differential input and reference, direct display drive – LCD ICL7106, LED lCL7107
• Low noise – less than 15µVP-P
• On-chip clock and reference
• Low power dissipation – typically less than 10mW
• No additional active circuits required
• Enhanced display stability
• Pb-free (RoHS compliant)
-11%
Rf Encoder Ic Ht12e 18 Dip
Original price was: ₨ 200.₨ 150Current price is: ₨ 150.
Simple Digital Voltmeter Ic Icl7107
Original price was: ₨ 650.₨ 400Current price is: ₨ 400.
ICL7106 Monolithic Analog-to- Digital Converter IC, For Electronics
Original price was: ₨ 450.₨ 400Current price is: ₨ 400.
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Atmega32 Atmega32a Atmega 32
Operating Voltage: 4.5V to 5V
Advanced RISC Architecture.
32 x 8 General Purpose Working Registers.
Fully Static Operation.
Up to 16 MIPS Throughput at 16 MHz.
On-chip 2-cycle Multiplier.
High Endurance Non-volatile Memory segments.
32 Kbytes of In-System Self-programmable Flash program memory.
1024 Bytes EEPROM.
2 Kbyte Internal SRAM.
Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
Data retention: 20 years at 85°C/100 years at 25°C(1).
Optional Boot Code Section with Independent Lock Bits.
In-System Programming by On-chip Boot Program.
True Read-While-Write Operation.
Programming Lock for Software Security.
Extensive On-chip Debug Support.
8 Single-ended Channels.
Byte-oriented Two-wire Serial Interface.
Programmable Serial USART.
Master/Slave SPI Serial Interface.
Programmable Watchdog Timer with Separate On-chip Oscillator.
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer
The Programmer Features
By special USB chip CH341A production. USB1.1 communication. Burning speed than ordinary ATMEGA8 25
Series of programming 2-3 times faster.
Erase the Burning Check Speed about 2-3 mbit per minute.
Very suitable for amateur burning
24 and 25 series of FLASH.
Support All versions of Microsoft Windows 7, 8, 10 etc & Linux & Mac OS
Uses the USB port power supply
For SPI & IIC Chip Programming (24 & 25 Series)
Put the Programmer in Computer USB port
Open the “CH341A programmer software” the burning software.
Choose Chip Capacity if using 24 Series, Click Detect for auto Detection of Chip of 25 Series
Can Burn Write, Erase & Backup Chips
For Serial TTL Programming
Set the Jumper
Put the Programmer computer USB port,
Programmer has Serial Pinouts of RX, TX & GND
Connect RX Pin to TX Pin & TX pin to RX Pin & GND to GND
Choose corresponding COM port,
Open the Corresponding Download Software Platform for example (PUTTY for Serial Terminal Emulator)
Original Atmega328 28 Pin Atmega328p-pu Microcontroller
Specifications of Atmel 8 Bit 28 Pins Microcontroller ATMEGA328P Microchip:
4.5V-5.5V operating range
Up to 20MHz
Part: ATMEGA328P-AU
32kB Flash program memory
1kB EEPROM
2kB Internal SRAM
Two8-bit Timer/Counters
One16-bit Timer/Counter
RTC with separate oscillator
6 PWM Channels
8 Channel 10-bit ADC
Serial USART
Master/Slave SPI interface
2-wire (I2C) interface
Watchdog timer
Analog comparator
23 IO lines
Data retention: 20 years at 85oC/ 100 years at 25oC
XH-W3005 Digital Humidity Controller
Product Name: Microcomputer Humidity Control Instrument
Product model: XH-W3005
Supply voltage: 220v or 12v
Control range: 0%-99%RH
Control accuracy: 0.1% RH
Measurement accuracy: +-2%RH
Load power: 1500W
Output type: direct output
Sensor: chip type
Appearance size: 60 x 45 x 31mm
Instructions:
Connect to the Power supply, display Instructions on humidity
Set start the humidity: Press the UP button display to start the humidity, long-press about 3s the start the humidity flashing, then press the Up or Down adjust the set
Set to stop the humidity: Press the Down button display Stop the humidity, long-press about 3s the Stop the humidity flashing, then press the Up or Down adjust the set
Restore the factory settings: press the Up and Down buttons at the same time, will display 888 then will Automatically detect the humidity
Package Include:
1 x Digital Humidity Controller
1 x Humidity Sensor
Reviews
There are no reviews yet.