Type
Description
Select All
Category
Power Supplies – Board Mount
DC DC Converters
Mfr
XP Power
Series
JTE (6W)
Packaging
Tube
Part Status
Active
Type
Isolated Module
Number of Outputs
1
Voltage – Input (Min)
9V
Voltage – Input (Max)
36V
Voltage – Output 1
15V
Voltage – Output 2
–
Voltage – Output 3
–
Current – Output (Max)
400mA
Power (Watts)
6 W
Voltage – Isolation
1.5 kV
Applications
ITE (Commercial)
Features
OCP, SCP, UVLO
Operating Temperature
-40°C ~ 100°C
Efficiency
84%
Mounting Type
Through Hole
Package / Case
24-DIP Module, 7 Leads
Size / Dimension
1.25″ L x 0.80″ W x 0.41″ H (31.8mm x 20.3mm x 10.4mm)
Standard Number
62368-1
Base Product Number
JTE0624
-6%
1470-1828-5-ND 1 Output 9V 333mA 36V - 72V Input
Original price was: ₨ 3750.₨ 3500Current price is: ₨ 3500.
1470-2433-5-ND 1 Output 15V 16.7mA 21.6V - 26.4V Input
Original price was: ₨ 3250.₨ 2750Current price is: ₨ 2750.
1470-2068-5-ND 1 Output 15V 400mA 9V – 36V Input
Original price was: ₨ 9500.₨ 8950Current price is: ₨ 8950.
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module
This 150W DC-DC Boost Converter 10-32V to 12-35V module allows you to step up an input voltage as low as 10V and set the output to 12V-35V. The output voltage will be higher than the input voltage. In addition the boost converter design is based on popular Texas Instrument’s UC3844 current mode PWM controller chip.
2in1 DC 0-100V Voltmeter Ammeter With DC 100A 75mV Ampere Shunt Dual 0.28″ Red Blue Voltage Detector Current Indicator
Power Supply (Measure Voltage): DC 4.5-30V
Measure Voltage Range:0-100v
Measure voltage < 10V,Min Resolution: 0.01V
Measure voltage >10V, Min resolution: 0.1V
Measure Current: 100A forward current ( more than 10A need shunt)
Current Resolution: 0.01A
Operating Current: <20mA
Display: 0.28 "LED monochrome（red and red)
Dimensions: 48 x 29 x 21 mm
Cutting Size: 45 x 26 mm
Measurement rate: ≥ 500mS / times
Accuracy: 1% (± 1 digit )
Operating Temperature: -10°c ~ +65°c
Operating Humidity: 10 ~ 80% (non-condensing)
Working pressure: 80 ~ 106kP
5V 1A Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery DIY Power Bank Module in Pakistan
This is the mobile power module Accessories, 18650 Circuit board shell. Meet the individual needs of your DIY, but you must understand basic electronic assembly. The use of the positive B + and b-negative welding note cannot be canceled Batteries: polymer battery 18650 lithium battery cell phone battery Tablet battery MP3 battery can be connected to a lithium battery can also be connected in several sections of lithium batteries, as long as the voltage is 3.7-4.2 V in parallel
LM2596 Dc To Dc Buck Converter Step Down Module Power Supply
LM2596 DC-DC Buck Converter Step Down Module Power Supply is a step-down(buck) switching regulator. LM2596 Buck is capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version. The LM2596 Stepdown module is operating at a switching frequency of 150kHz, thus allowing smaller sized filter components than what would be required with lower frequency switching regulators
TP4056 C Type USB Port 1A 18650 Lithium Battery Charging Board Charger Module
Input voltage: 5V
Load cut-off voltage: 4.2V ± 1%
Maximum charging current: 1000mA
Excessive battery discharge protection voltage: 2.5V
Battery overcurrent protection current: 3A
Panel size: 17.16 mm x 26.17 mm
Charge precision: 1.5%.
Led indicator: red is charging Green is full charged.
Input interface: Type-C
Work temperature- -10° to +85°.
Reverse polarity protection: No
Size: 25X19X10mm.
works with all types of lipo & lithium batteries like 18650
Connect Battery with B+ & B-
Connect Battery load OUT+ & OUT – (this is uninterrupted power supply
XL4015 5A Step Down Module with Digital Voltmeter
XL4015 5A Step Down Module with Digital Voltmeter
The module comes equipped with a voltmeter, ammeter, power meter, and a USB interface for charging digital products.
A buck converter or step-down converter is a DC-to-DC converter that steps down voltage (while stepping up current) from its input (supply) to its output (load). It is a class of switched-mode power supply. This product is a 180 KHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 5A load with high efficiency, low ripple, and excellent line and load regulation. The module with a voltage meter to display the input voltage and output voltage, and the voltage can be corrected through the button to improve the accuracy of the voltmeter
XL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
XL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
Xl6009 booster module is a 4A switching current high performance BOOST module, with the third generation of high frequency switch technology as the core chip, the performance is far superior to LM2577. It can be used for booster power supply, DIY adjustable mobile power supply, booster charger, etc.
Reviews
There are no reviews yet.