180 Degree AC 85-265V Human Infrared Sensor Switch Light Sensor Monitoring Spotlights PIR Switch
This is a 220V AC human infrared sensors, pyroelectric infrared technology, the use of industrial district-level chip, intelligent control, set energy saving, convenient and environmentally friendly one, very convenient. This module also comes in 12V DC variant.
Features :
Built-human infrared sensor module, sensor module light effects, delay switch module.
load capacity, strong anti-jamming capability.
people into the sensing range, can be automatically opened, after leaving the automatic delay off,
can automatically identify day and night, and the external environment illuminance can freely choose the starting job,
Automatic work to do in the evening, during the day and closed. Users can adjust;
Light time is adjustable and can be adjusted by the user according to local conditions.
Adjustment
LUX
Regulate the work day or night.
A : When transferred to the position of the sun, the sensor-day work;
B : When transferred to the position of the moon,
the sensor does not work during the day, at night automatically enter the working state.
Time
Is to adjust the sensor delay time (10 ± 2sec – 7 ± 1min)
Delay time is the sensor sensitive to the people, the people left the sensing area, the sensor delay off time.
Sense
Is to adjust the sensor sensitivity. Generally do not need adjustment.
-14%
0%
XH-W3005 Digital Humidity Controller
Original price was: ₨ 1850.₨ 1500Current price is: ₨ 1500.
AC 220V PIR Motion Sensor PIR Detector Infrared Motion Sensor
Original price was: ₨ 750.₨ 600Current price is: ₨ 600.
Security PIR Infrared Sensor Detector, Outdoor 90~250V 180 Degree Infrared PIR Motion Sensor Detector Wall Light Switch, Motion Activated switches
Original price was: ₨ 1450.₨ 1250Current price is: ₨ 1250.
Working Voltage: AC 85-265V
Sensing angle: 180 degree
Sensing distance: Max 12m (25℃) (Adjustable)
Sensor delay: 5s – 6min (Adjustable)
LUX Setting: 2 – 2000LUX (Adjustable)
Material: ABS
IP rating: IP65
Installation Height: 1.8m – 2.5m
Lifespan: 50,000 hours
Working temperature: –10℃ ~ +40℃
Working humidity: less than 93% RH
Item size: 15.6 * 6.0 * 4.7cm / 6.1 * 2.4 * 1.9in (L * W * H)
Item weight: 118g / 4.2oz
Package size: 20 * 14 * 4.7cm / 7.9 * 5.5 * 1.9in (L * W * H)
Package weight: 128g / 4.5oz
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Arduino Due Price in Pakistan
This Arduino Due microcontroller is based on the board of Atmel SAM3X8E ARM CortexM3 CPU. This Arduino due board is based on 32 bit ARM core microcontroller. Atmel SAM3X8E Arduino board contains 54 digital input/ output pins, 12 analog inputs, 4 UARTs, an 84 Mhz clock, an USB OTG capable connection, 2 DAC and DAC stands for Digital to Analog Converter, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. Arduino board contains everything needed to support the microcontroller. We just need to connect the micro USB of Arduino Due to the computer. And this cable is included in the product pack. We just need to power it with an AC to DC adapter or battery to get started. This Arduino Due is compatible with all Arduino shields. And that works at 3.3V. these are compliant with 1.0 Arduino pinout. we provide high 6 inches micro USB cable with high-quality connection Arduino Due
Ch340g Usb To Ttl(serial) Converter For Arduino
This is PL2303 CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc. This USB-TTL converter is based on CH340G USB to Serial TTL converter chip. The module can be used for 3.3V logic level signals, and has the option to switch from 5V to 3.3V logic level using a 2 pin shunt (shortening jumper for specific pins) supplied with the module.
MAX6675 Module + K Type Thermocouple
This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. This sensor is available at electronicstore.pk shop online in Pakistan.
Mq135 Air Quality Detector Sensor Module In Pakistan
The MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising. Convert change of conductivity to the corresponding output signal of gas concentration. The MQ135 gas sensor has high sensitivity to Ammonia, Sulphide and Benzene steam, also sensitive to smoke and other harmful gases. It is with low cost and suitable for different applications such as harmful gases/smoke detection
Mq4 High Sensitivity Gas Methane (cng) Detector Sensor Module
MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
NodeMCU Lolin V3 ESP8266 WiFi Microcontroller Module
Arduino-Like Hardware IO
Code like Arduino, but interactively in Lua script
Event-driven API for network applications, which facilitates developers writing code
Integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board
10 GPIO, every GPIO can be PWM, I2C, 1-wire
4M Flash Memory
Built-in WiFi Antenna
sp32-cam Wifi + Bluetooth Camera Module Development Board Esp32 With Camera Module Ov2640 For Arduino
SP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications.
Features:
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Low-power dual-core 32-bit CPU for application processors
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras with built-in flash
Support for images WiFI upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA+AP working mode
Support Smart Config/AirKiss One-click distribution network
Support for serial local upgrade and remote firmware upgrade (FOTA)
Support secondary development
Reviews
There are no reviews yet.