-25%
360 product view
    Click to enlarge
    TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection BMS Original price was: ₨ 80.Current price is: ₨ 60.
    Back to products
    QC MOBILE POWER BOOST MODULE 5V 2.4A CHARGER CIRCUIT BOARD LCD DISPLAY Original price was: ₨ 650.Current price is: ₨ 500.

    TP4056 C Type USB Port 1A 18650 Lithium Battery Charging Board Charger Module

    Original price was: ₨ 80.Current price is: ₨ 60.

    Input voltage: 5V
    Load cut-off voltage: 4.2V ± 1%
    Maximum charging current: 1000mA
    Excessive battery discharge protection voltage: 2.5V
    Battery overcurrent protection current: 3A
    Panel size: 17.16 mm x 26.17 mm
    Charge precision: 1.5%.
    Led indicator: red is charging Green is full charged.
    Input interface: Type-C
    Work temperature- -10° to +85°.
    Reverse polarity protection: No
    Size: 25X19X10mm.
    works with all types of lipo & lithium batteries like 18650
    Connect Battery with B+ & B-
    Connect Battery load OUT+ & OUT – (this is uninterrupted power supply

    Compare
    Add to wishlist
    Categories: ,
    Description

    This tiny module is perfect for charging single cell 3.7V 1 Ah or higher LiPo cells such as 16550s that do not have their own protection circuit. Based around the TP4056 charger IC and DW01 Deep Drain Battery Protection IC this module offers 1A charge current. The module cuts off charging current when finished.

    Furthermore when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.

    Features
    Under Voltage Cut off / Deep Drain Protection
    Over Current Protection
    Adjustable Current Limit through R-Prog
    Over-voltage charging protection
    Usb Type-C Connector (with more commonly available usb cables)
    LED Status Indicator for Charging / Full charge status monitoring

    Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “TP4056 C Type USB Port 1A 18650 Lithium Battery Charging Board Charger Module”

    Your email address will not be published. Required fields are marked *

    Shipping & Delivery
    wd-ship-1
    wd-ship-2

    MAECENAS IACULIS

    Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

    ADIPISCING CONVALLIS BULUM

    • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
    • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
    • Diam parturient dictumst parturient scelerisque nibh lectus.

    Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

    Related products

    -14%
    Compare

    Mq2 Gas Sensor Detector Module In Pakistan

    Original price was: ₨ 350.Current price is: ₨ 300.
    Features: Sensitive for LPG, propane, hydrogen Output voltage boosts along with the concentration of the measured gases increases Fast response
    Add to wishlist
    Add to cart
    Quick view
    -25%
    Compare

    Mq3 Alcohol Sensor Detector Gas Sensor Module In Pakistan

    Original price was: ₨ 400.Current price is: ₨ 300.
    MQ3 MQ 3 MQ-3 Alcohol Detector Gas Sensor Module is a simple to use MQ-3 Alcohol Detector Gas Sensor Module which can sense the presence of Alcohol in the air. The module uses our MQ-3 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides an interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gas in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas. Perfect sensing alcohol concentration on your breath just likes common breathalyzer. mq3 alcohol sensor working
    Add to wishlist
    Add to cart
    Quick view
    -14%
    Compare

    Mq8 Hydrogen Gas Sensor Module In Pakistan

    Original price was: ₨ 350.Current price is: ₨ 300.
    MQ8 MQ 8 MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection MQ-8 Sensor Hydrogen Gas Sensor Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Using a simple circuit to convert the change in conductivity of the gas concentration corresponding to the output signal. MQ-8 hydrogen gas sensor of high sensitivity, the monitoring of the other hydrogen-containing gas is also very satisfactory. This sensor can detect a wide range of hydrogen gas, city gas, in particular, is a low-cost sensor for a variety of applications.
    Add to wishlist
    Add to cart
    Quick view
    -13%
    Compare

    NodeMCU Lolin V3 ESP8266 WiFi Microcontroller Module

    ,
    Original price was: ₨ 750.Current price is: ₨ 650.
    Arduino-Like Hardware IO Code like Arduino, but interactively in Lua script Event-driven API for network applications, which facilitates developers writing code Integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board 10 GPIO, every GPIO can be PWM, I2C, 1-wire 4M Flash Memory Built-in WiFi Antenna
    Add to wishlist
    Add to cart
    Quick view
    -30%
    Compare

    Official Raspberry Pi Case for Raspberry Pi 5, Built-in Cooling Fan, Red/White Color

    ,
    Original price was: ₨ 4000.Current price is: ₨ 2800.
    Specification Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5 Fan speed control: Pulse width modulation control with tachometer Maximum airflow: 2.79 CFM Maximum fan speed: 8000 RPM +/- 15% Case material: ABS (base, frame, lid) and PC (fan assembly)
    Add to wishlist
    Add to cart
    Quick view
    -20%
    Compare

    RS485 to TTL UART Converter Module

    Original price was: ₨ 150.Current price is: ₨ 120.
    RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan
    Add to wishlist
    Add to cart
    Quick view
    -9%
    Compare

    sp32-cam Wifi + Bluetooth Camera Module Development Board Esp32 With Camera Module Ov2640 For Arduino

    ,
    Original price was: ₨ 1680.Current price is: ₨ 1530.
    SP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications. Features: Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module Low-power dual-core 32-bit CPU for application processors Up to 240MHz, up to 600 DMIPS Built-in 520 KB SRAM, external 4M PSRAM Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC Support OV2640 and OV7670 cameras with built-in flash Support for images WiFI upload Support TF card Support multiple sleep modes Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss One-click distribution network Support for serial local upgrade and remote firmware upgrade (FOTA) Support secondary development
    Add to wishlist
    Add to cart
    Quick view
    -8%
    Compare

    WROOM ESP32 Wifi Microcontroller Development

    ,
    Original price was: ₨ 1200.Current price is: ₨ 1100.
    ESP32 is a prototyping board that is the work of the Shanghai-based company Espressif Systems. It incorporates the ESP32, a microprocessor tailored toward wearable electronics and IoT. It boasts integrated Wi-Fi and Bluetooth, along with an array of inbuilt antenna switches, and ultra-low power consumption. The company released the ESP8266 chip in 2014. Costing only a few dollars, this small chip is able to bridge an Arduino with a WiFi network, solving many issues that early IoT pioneers experienced. 1 Add to cart Add to wishlist Compare Tags: ESP esp32 ESP8266 nodemcu nodemuc wifi bluetooth wifi development board
    Add to wishlist
    Add to cart
    Quick view