Type
Description
Select All
Category
Power Supplies – Board Mount
DC DC Converters
Mfr
XP Power
Series
IV (1W)
Packaging
Tube
Part Status
Active
Type
Isolated Module
Number of Outputs
2
Voltage – Input (Min)
10.8V
Voltage – Input (Max)
13.2V
Voltage – Output 1
24V
Voltage – Output 2
-24V
Voltage – Output 3
–
Current – Output (Max)
21mA, 21mA
Power (Watts)
1 W
Voltage – Isolation
3 kV
Applications
ITE (Commercial)
Features
–
Operating Temperature
-40°C ~ 85°C
Efficiency
75%
Mounting Type
Through Hole
Package / Case
7-SIP Module, 5 Leads
Size / Dimension
0.76″ L x 0.24″ W x 0.39″ H (19.3mm x 6.0mm x 10.0mm)
Control Features
–
Standard Number
62368-1
Base Product Number
IV1224
-15%
1470-2553-5-Nd Isolated Module DC DC Converter 1 Output 9V 666mA 36V - 75V Inpu
Original price was: ₨ 7350.₨ 6950Current price is: ₨ 6950.
1470-2406-5-ND Isolated Module DC DC Converter 2 Output 3.3V -3.3V 200mA, 200mA 4.5V - 5.5V Input
Original price was: ₨ 3250.₨ 2750Current price is: ₨ 2750.
1470-2474-5-ND Isolated Module DC DC Converter 2 Output 24V -24V 21mA, 21mA 10.8V – 13.2V Input
Original price was: ₨ 3250.₨ 2750Current price is: ₨ 2750.
1470-2474-5-ND Isolated Module DC DC Converter 2 Output 24V -24V 21mA, 21mA 10.8V – 13.2V Input
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
2in1 DC 0-100V Voltmeter Ammeter With DC 100A 75mV Ampere Shunt Dual 0.28″ Red Blue Voltage Detector Current Indicator
Power Supply (Measure Voltage): DC 4.5-30V
Measure Voltage Range:0-100v
Measure voltage < 10V,Min Resolution: 0.01V
Measure voltage >10V, Min resolution: 0.1V
Measure Current: 100A forward current ( more than 10A need shunt)
Current Resolution: 0.01A
Operating Current: <20mA
Display: 0.28 "LED monochrome（red and red)
Dimensions: 48 x 29 x 21 mm
Cutting Size: 45 x 26 mm
Measurement rate: ≥ 500mS / times
Accuracy: 1% (± 1 digit )
Operating Temperature: -10°c ~ +65°c
Operating Humidity: 10 ~ 80% (non-condensing)
Working pressure: 80 ~ 106kP
4A Buck Boost Converter Module Adjustable Step Down with LCD Display Power (HW-140)
4A Buck Boost Converter Module Adjustable Step Up and Step Down Function with LCD Display Power (HW-140)
Function Description:
The module has IN/OUT, ON/OFF two buttons: IN/OUT button switches input voltage and output voltage display, long press can switch output current output power display; ON/OFF button control output ON or OFF, long press can Set the default output status of the next power-on to be ON or OFF.
CC is the current setting potentiometer, clockwise rotation, can increase the set current, when the load current reaches the set current, enter the constant current state, the CC constant current indicator (red) lights up; the right CV is the voltage setting The potentiometer rotates clockwise to increase the output voltage. The ON indicator is an output status indicator that lights up when there is voltage at the output, otherwise it is off.
Instructions:
1. Use as a common buck-boost module with overcurrent protection
(1) Adjust the CV constant voltage device so that the output voltage reaches the voltage you want.
(2) Use the multimeter 10A current file to measure the output short-circuit current (directly connect the two test leads to the output terminal), and adjust the CC constant current potentiometer to make the output current reach the predetermined overcurrent protection value.
(3)(For example, if the current value displayed by the multimeter is 2A, then the maximum current can only be 2A when you use the module, and the red constant voltage constant current indicator will be on when the current reaches 2A, otherwise the indicator will be off)
Note: When using in this state, there is a current sampling resistor at the output, there will be a voltage drop of 0~0.2V after the load is connected, and at the same time, the input wire and the output wire will have a certain line voltage drop when the current is large. This is normal!
2. Use as a battery charger
Modules without constant current function cannot be used to charge the battery. Because the voltage difference between the battery and the charger that consumes electricity is too large, the charging current is too large, causing damage to the battery. Therefore, the battery should be used at the beginning. Stream charging, automatically switch back to constant voltage charging when charging to a certain extent electronicstore.pk
LM2596 Dc To Dc Buck Converter Step Down Module Power Supply
LM2596 DC-DC Buck Converter Step Down Module Power Supply is a step-down(buck) switching regulator. LM2596 Buck is capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version. The LM2596 Stepdown module is operating at a switching frequency of 150kHz, thus allowing smaller sized filter components than what would be required with lower frequency switching regulators
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection BMS
This 3.7V Battery Charger TP4056 module is made for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. In addition to safely charging a lithium battery, TP4056 BMS Board also provides the necessary protection required by lithium batteries. The TP4056 is suitable for USB power and adapter power supplies. Due to the internal PMOSFET architecture and anti-reverse charging path, no external isolation diodes are required.
Specification of TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection BMS:
Charge module: Linear charging.
Current:1A adjustable.
Charge precision:1.5%.
Input voltage:4.5V-5.5V.
Full charge voltage:4.2V ± 1%
Led indicator: red is charging Green is fully charged.
Input interface:micro USB/mini usb/type-c usb
Work temperature:-10° to +85°.
Inversed polarity: NO.
XL4015 DC-DC Adjustable Step Down Module
Input voltage range：4～38VDC(Note: input voltage not exceeding 38V).
Output voltage range：1.25-36VDC adjustable.
Output current: 0-5A.
High efficiency up to 96%.
Output power: 75W.
Built-in thermal shutdown function
Built-in current limit function
In-Built output short protection function
Input reverse polarity protection: None (if required, the high current diode in series with the input).
Power Indicator: Yes
Short circuit protection: Yes (limit current 8A)
Overtemperature protection: (automatically shut off the output after overtemperature)
Input reverse polarity protection: No, (if necessary, please enter the string into the high current diode)
Installation: two 3mm screws
Dimensions(LxWxH): 54 x 23 x 15 mm.
XL6009 Digital DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
L6009 DC-DC Boost Converter 4A Adjustable Step-Up 5-32V to 5V-40V + LED Voltmeter
XL6009 is a 4A switch current high performance boost ( BOOST ) module. This module uses the second-generation high-frequency switching technology XL6009E1 as the core chip, and its performance far exceeds that of the first-generation technology LM2577 . The XL6009 booster module has lower cost and better performance, and the LM2577 module is about to be eliminated.
Characteristics:
Reviews
There are no reviews yet.