Applications
Car , laptop power supply : Run Laptop on DC24V Car battery . (Laptops usually require 17V – 18V DC.)
Run Communication equipment on 24V battery
Run Low voltage (12V – 18V) DC motors used in Robots on 24V or 36V batteries
Step down battery charger : Because of CC and CV adjustments module can be used as battery charger
Solar battery charger
Pre-supply voltage regulator for Lab Power Supply
Constant Current LED Lighting Power Supply
Technical Specifications
Material: PCB board and electronic component
Input voltage: 5-40V
Output voltage: 1.2-35V (continuously adjustable)
Output Current: 8A
Constant current range:0.2-8A ( adjustable )
Maximum Eficiency : 95%
Load Regulation : 1%
Voltage Regulation: 1%
Output Power: Maximum power is about 280W (power tube temperature exceeds 65°C please add cooling fan)
Short circuit protection: No (Please installs the fuse or protection circuit at input parts).
Input Reverse protection: No (please comply with a reverse protection or connect a diode at input parts.)
The temperature of the step up Module should not exceed 80C
Size: Approx. 2.55*1.88*0.94inch / 6.5*4.8*2.4cm(Length*width*thickness)
[!] Warnings
The maximum rated values should NEVER be continuous from the load or else the module will be damaged.
Be sure to install correct circuit protection, such as fuses, to the input of the module to avoid overloading and the potential for fire.
If temperature exceeds 65°C please add cooling fan
Failure to take these precautions and incorrect use of this module may result in damage, fire, and/or personal injury.
Output setpoint voltage must always be lower than applied input voltage.
Documents and Downloads
XL4016 8A 180KHz 40V Buck DC to DC Converter Datasheet
Package Includes
1x XL4016 CC-CV DC-DC Buck / Step-Down Converter
-11%
0%
150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module
Original price was: ₨ 700.₨ 600Current price is: ₨ 600.
300w 20a Adjustable Dc-dc Step Down Buck Converter Voltage Regulator Power Supply Module
Original price was: ₨ 1500.₨ 1400Current price is: ₨ 1400.
Cc-cv Xl4016 9a Dc To Dc Adjustable Buck Converter
Original price was: ₨ 950.₨ 850Current price is: ₨ 850.
he DC-DC Step-Down 9A XL4016 voltage converter has the function of delivering a constant output voltage lower than the input voltage against variations in the input or load voltage. It supports output currents of up to 9A, input voltage between 8V to 40V and output voltage between 1.25V to 36V. The output voltage is selected by a multiturn potentiometer
| Weight | 300 kg |
|---|
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
2in1 DC 0-100V Voltmeter Ammeter With DC 100A 75mV Ampere Shunt Dual 0.28″ Red Blue Voltage Detector Current Indicator
Power Supply (Measure Voltage): DC 4.5-30V
Measure Voltage Range:0-100v
Measure voltage < 10V,Min Resolution: 0.01V
Measure voltage >10V, Min resolution: 0.1V
Measure Current: 100A forward current ( more than 10A need shunt)
Current Resolution: 0.01A
Operating Current: <20mA
Display: 0.28 "LED monochrome（red and red)
Dimensions: 48 x 29 x 21 mm
Cutting Size: 45 x 26 mm
Measurement rate: ≥ 500mS / times
Accuracy: 1% (± 1 digit )
Operating Temperature: -10°c ~ +65°c
Operating Humidity: 10 ~ 80% (non-condensing)
Working pressure: 80 ~ 106kP
4A Buck Boost Converter Module Adjustable Step Down with LCD Display Power (HW-140)
4A Buck Boost Converter Module Adjustable Step Up and Step Down Function with LCD Display Power (HW-140)
Function Description:
The module has IN/OUT, ON/OFF two buttons: IN/OUT button switches input voltage and output voltage display, long press can switch output current output power display; ON/OFF button control output ON or OFF, long press can Set the default output status of the next power-on to be ON or OFF.
CC is the current setting potentiometer, clockwise rotation, can increase the set current, when the load current reaches the set current, enter the constant current state, the CC constant current indicator (red) lights up; the right CV is the voltage setting The potentiometer rotates clockwise to increase the output voltage. The ON indicator is an output status indicator that lights up when there is voltage at the output, otherwise it is off.
Instructions:
1. Use as a common buck-boost module with overcurrent protection
(1) Adjust the CV constant voltage device so that the output voltage reaches the voltage you want.
(2) Use the multimeter 10A current file to measure the output short-circuit current (directly connect the two test leads to the output terminal), and adjust the CC constant current potentiometer to make the output current reach the predetermined overcurrent protection value.
(3)(For example, if the current value displayed by the multimeter is 2A, then the maximum current can only be 2A when you use the module, and the red constant voltage constant current indicator will be on when the current reaches 2A, otherwise the indicator will be off)
Note: When using in this state, there is a current sampling resistor at the output, there will be a voltage drop of 0~0.2V after the load is connected, and at the same time, the input wire and the output wire will have a certain line voltage drop when the current is large. This is normal!
2. Use as a battery charger
Modules without constant current function cannot be used to charge the battery. Because the voltage difference between the battery and the charger that consumes electricity is too large, the charging current is too large, causing damage to the battery. Therefore, the battery should be used at the beginning. Stream charging, automatically switch back to constant voltage charging when charging to a certain extent electronicstore.pk
TP5000 4.2V/3.6V 1A Lithium Battery Charging Board Charger Module in Pakistan
TP5000 4.2V/3.6V 1A Lithium Battery Charging Board Charger Module
Features:Charging for Lithium battery(4.2V) and Lithium iron phosphate battery(3.6V)
Type:Voltage Regulator
Supply Voltage:DC 4.5-9V (not exceed 7V)
Model Number:TP5000 Lithium Battery Charger
Condition:New
Application:Electronic Circuit
Input voltage:DC 4.5-9V (not exceed 7V)
Output voltage:DC 4.2V/3.6V (default 4.2V)
XL4015 5A Step Down Module with Digital Voltmeter
XL4015 5A Step Down Module with Digital Voltmeter
The module comes equipped with a voltmeter, ammeter, power meter, and a USB interface for charging digital products.
A buck converter or step-down converter is a DC-to-DC converter that steps down voltage (while stepping up current) from its input (supply) to its output (load). It is a class of switched-mode power supply. This product is a 180 KHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 5A load with high efficiency, low ripple, and excellent line and load regulation. The module with a voltage meter to display the input voltage and output voltage, and the voltage can be corrected through the button to improve the accuracy of the voltmeter
XL4015 DC-DC Adjustable Step Down Module
Input voltage range：4～38VDC(Note: input voltage not exceeding 38V).
Output voltage range：1.25-36VDC adjustable.
Output current: 0-5A.
High efficiency up to 96%.
Output power: 75W.
Built-in thermal shutdown function
Built-in current limit function
In-Built output short protection function
Input reverse polarity protection: None (if required, the high current diode in series with the input).
Power Indicator: Yes
Short circuit protection: Yes (limit current 8A)
Overtemperature protection: (automatically shut off the output after overtemperature)
Input reverse polarity protection: No, (if necessary, please enter the string into the high current diode)
Installation: two 3mm screws
Dimensions(LxWxH): 54 x 23 x 15 mm.
XL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
XL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
Xl6009 booster module is a 4A switching current high performance BOOST module, with the third generation of high frequency switch technology as the core chip, the performance is far superior to LM2577. It can be used for booster power supply, DIY adjustable mobile power supply, booster charger, etc.
XL6009 Digital DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
L6009 DC-DC Boost Converter 4A Adjustable Step-Up 5-32V to 5V-40V + LED Voltmeter
XL6009 is a 4A switch current high performance boost ( BOOST ) module. This module uses the second-generation high-frequency switching technology XL6009E1 as the core chip, and its performance far exceeds that of the first-generation technology LM2577 . The XL6009 booster module has lower cost and better performance, and the LM2577 module is about to be eliminated.
Characteristics:
Reviews
There are no reviews yet.