MQ-5 Natural/ LPG Gas Sensor Module for Arduino
Features
Small sensitivity to LPG, H2, LPG, CH4, and CO
Fast response
Stable and long life
Simple drive circuit
Indication of the signal output.
Dual signal output (analog output, and TTL level output)
TTL output signal is low. (When low output signal light, and can be connected directly to the microcontroller)
Liquefied petroleum gas, natural gas, city gas, better sensitivity.
Has a long life and reliable stability
Specifications
Working Voltage: 4.9V-5.1V
Heater Resistance: 31±10%
Adjustable Resistance
Sensing Resistance Range: 10 – 60K
Sensor Heat Consumption: 0.5-800mW
Detecting Concentration: 200-10000ppm
Pinouts of MQ5 Sensor
Pin Name Description
Vcc Power Pin requires an operating voltage of 5V.
GND Ground pin.
DO Digital out the pin, to get the digital output from the sensor, need to set the threshold value using Pot.
AO Analog out the pin. It based the output of this pin on the intensity of the methane gas.
-13%
0%
Mq4 High Sensitivity Gas Methane (cng) Detector Sensor Module
Original price was: ₨ 400.₨ 350Current price is: ₨ 350.
MQ-6 LPG/Butane Gas Sensor Module
Original price was: ₨ 400.₨ 350Current price is: ₨ 350.
MQ-5 Natural/ LPG Gas Sensor Module
Original price was: ₨ 400.₨ 350Current price is: ₨ 350.
MQ-5 Natural/ LPG Gas Sensor Module are used in gas leakage detecting houses and industries. Sensitive for LPG, natural gas, coal gas.
| Weight | 300 kg |
|---|
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Ch340 Arduino Mega 2560 With Cable In Pakistan
The Mega 2560 is a micro-controller board base on the CH340. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start. The Mega is compatible with most shields design for the Duemilanove or Diecimila.
The Mega 2560 is an update to the Mega, which it replaces. The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the CH340 programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
MAX6675 Module + K Type Thermocouple
This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. This sensor is available at electronicstore.pk shop online in Pakistan.
Mq4 High Sensitivity Gas Methane (cng) Detector Sensor Module
MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
RS485 to TTL UART Converter Module
RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan
Reviews
There are no reviews yet.