Features:
Sensitive for LPG, propane, hydrogen
Output voltage boosts along with the concentration of the measured gases increases
Fast response and recovery
Features boost circuit
Adjustable sensitivity
Signal output indicator
Pin Configuration:
Pin No: Pin Name: Description
For Module
1 Vcc This pin powers the module, typically the operating voltage is +5V
2 Ground Used to connect the module to system ground
3 Digital Out You can also use this sensor to get digital output from this pin, by setting a threshold value using the potentiometer
4 Analog Out This pin outputs 0-5V analog voltage based on the intensity of the gas
For Sensor
1 H -Pins Out of the two H pins, one pin is connected to supply and the other to ground
2 A-Pins The A pins and B pins are interchangeable. These pins will be tied to the Supply voltage.
3 B-Pins The A pins and B pins are interchangeable. One pin will act as output while the other will be pulled to ground.
Applications
Gas leakage detector
SKU: 0125 Categories: Gas Sensors, Modules and Breakout Boards, Sensors & Transducers Tags: Alcohol, Benzene, detector, Gas, module, MQ-2, Sensor, Smoke
Description
Specification
Operating Voltage is +5V
Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even Methane
Sensitive for LPG, propane, hydrogen
Analog output voltage: 0V to 5V
Digital Output Voltage: 0V or 5V (TTL Logic)
Preheat duration 20 seconds
Can be used as a Digital or analog sensor
The Sensitivity of Digital pin can be varied using the potentiometer
“Mq4 High Sensitivity Gas Methane (cng) Detector Sensor Module” has been added to your cart. View cart
-14%
XL6009E1 1.3-35V 3A Auto Step Up/Down Buck/Boost DC-DC Converter
₨ 400 Original price was: ₨ 400.₨ 370Current price is: ₨ 370.
Mq3 Alcohol Sensor Detector Gas Sensor Module In Pakistan
₨ 400 Original price was: ₨ 400.₨ 300Current price is: ₨ 300.
Mq2 Gas Sensor Detector Module In Pakistan
₨ 350 Original price was: ₨ 350.₨ 300Current price is: ₨ 300.
| Weight | 300 kg |
|---|
Category: SENSOR/MODULE
Description
Reviews (0)
Be the first to review “Mq2 Gas Sensor Detector Module In Pakistan” Cancel reply
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Arduino Leonardo In Pakistan Atmega32u Based Development Board (Copy)
ESP32 WROOM-32 38-pins Wifi+Bluetooth MCU Module
ESP32 WROOM-32 38-pins Wifi+Bluetooth MCU Module
This is ESP WROOM 32/ ESP32 Wi-Fi-BT-BLE MCU Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding.
At the core of this module is the ESP32 chip, which is designed to be scalable and adaptive. There are 2 CPU cores that can be individually controlled or powered, and the clock frequency is adjustable from 80 MHz to 240 MH
ESP32-S3 DevKitC-1 N16R8 Development Board – 16MB Flash, 8MB PSRAM, Wi-Fi & Bluetooth 5.0 LE Price in Pakistan
GY-271 HMC5883L Triple Axis Compass Magnetometer Sensor Module in Pakistan
The GY-271 module is based on the Honeywell HMC5883L IC for low-field magnetic sensing with a digital interface for applications such as lowcost compassing and magnetometry. The HMC5883L includes state-of-theart, high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification, automatic degaussing strap drivers, offset cancellation and a 12-bit ADC that enables.
MQ-7 Carbon Mono Oxide Gas Sensor Module
Mq4 High Sensitivity Gas Methane (cng) Detector Sensor Module
MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
Mq8 Hydrogen Gas Sensor Module In Pakistan
MQ8 MQ 8 MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection MQ-8 Sensor Hydrogen Gas Sensor Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Using a simple circuit to convert the change in conductivity of the gas concentration corresponding to the output signal. MQ-8 hydrogen gas sensor of high sensitivity, the monitoring of the other hydrogen-containing gas is also very satisfactory. This sensor can detect a wide range of hydrogen gas, city gas, in particular, is a low-cost sensor for a variety of applications.
Mq9 Carbon Monoxide Methane And Lpg Gas Sensor Module In Pakistan
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module can be use to sense Carbon Monoxide and Metahane Gas. Sensitive material of MQ-9 gas sensor is SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V). The sensor’s conductivity is more higher along with the gas concentration rising. When high temperature (heated by 5.0V), it detects Methane, Propane etc. combustible gas and cleans the other gases adsorbed under low temperature.

Reviews
There are no reviews yet.