Original Mini RS232 To TTL Converter Adaptor Module Board Max3232 Serial Port
Serial Port Mini RS232 to TTL Converter Adaptor Module Board MAX3232 for the electrical level converter. The RS232 to TTL 5V Signal Converter Module is a professional module for projects requiring PC, Laptop RS232 interface to 5V TTL logic. This RS232 to TTL module converts signals between RS232 voltage levels and TTL voltage levels. The serial port to TTL board is bi-directional, where TTL signals are converted to RS232 levels and RS232 levels are converted to TTL levels. MAX3232 module is ideal for use in pc interfacing, microcontroller-based projects, robotics, or for experimental and educational purposes.
-25%
0%
SHT30 I2C Humidity And Temperature Sensor In Pakistan
Original price was: ₨ 850.₨ 700Current price is: ₨ 700.
Wx110(010) 1k 1w Single Turn Rotary Taper Carbon Wire Wound Potentiometer Volume Resistor
Original price was: ₨ 400.₨ 350Current price is: ₨ 350.
Original Mini RS232 To TTL Converter Adaptor Module Board Max3232 Serial Port
Original price was: ₨ 100.₨ 75Current price is: ₨ 75.
Chip Model: MAX232CSE
Protocol: RS232
Operating Voltage: 3 ~ 5VDC
Max. Baud Rate: 120kbps
Operation: Full Duplex
Receiver Hysteresis: 300mV
Transceiver: 2 (1 TTL -> RS232 + 1 TTL <- RS232)
Operating Tempreture: -40°C ~ 85°C
High speed, replaceable MAX232 based. The device fitted supports up to 120kbps
Works with PCs or Laptops
Supports microcontroller UARTs – 5V TTL signal levels.
Single DC supply: wide input range for 4201 or 5V for 4202 and 4203
Small PCB footprint of 50´40mm
Low current status LED(s)
Very low power consumption
Optional onboard PSU for internal/external use for a quick start out of the box.
Power can be routed to pin 9 (if required) on the RS232 connector – useful for specific
applications.
Dimensions in: mm
Length: 16.22mm
Width: 10.3mm
Height:3.5mm
Weight: 2gm
Package Includes:
1 x RS232 Serial Port To TTL Converter Adaptor Module Board MAX3232
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Ch340g Usb To Ttl(serial) Converter For Arduino
This is PL2303 CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc. This USB-TTL converter is based on CH340G USB to Serial TTL converter chip. The module can be used for 3.3V logic level signals, and has the option to switch from 5V to 3.3V logic level using a 2 pin shunt (shortening jumper for specific pins) supplied with the module.
MAX6675 Module + K Type Thermocouple
This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. This sensor is available at electronicstore.pk shop online in Pakistan.
Mq4 High Sensitivity Gas Methane (cng) Detector Sensor Module
MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
Mq8 Hydrogen Gas Sensor Module In Pakistan
MQ8 MQ 8 MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection MQ-8 Sensor Hydrogen Gas Sensor Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Using a simple circuit to convert the change in conductivity of the gas concentration corresponding to the output signal. MQ-8 hydrogen gas sensor of high sensitivity, the monitoring of the other hydrogen-containing gas is also very satisfactory. This sensor can detect a wide range of hydrogen gas, city gas, in particular, is a low-cost sensor for a variety of applications.
Mq9 Carbon Monoxide Methane And Lpg Gas Sensor Module In Pakistan
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module can be use to sense Carbon Monoxide and Metahane Gas. Sensitive material of MQ-9 gas sensor is SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V). The sensor’s conductivity is more higher along with the gas concentration rising. When high temperature (heated by 5.0V), it detects Methane, Propane etc. combustible gas and cleans the other gases adsorbed under low temperature.
WROOM ESP32 Wifi Microcontroller Development
ESP32 is a prototyping board that is the work of the Shanghai-based company Espressif Systems. It incorporates the ESP32, a microprocessor tailored toward wearable electronics and IoT. It boasts integrated Wi-Fi and Bluetooth, along with an array of inbuilt antenna switches, and ultra-low power consumption. The company released the ESP8266 chip in 2014. Costing only a few dollars, this small chip is able to bridge an Arduino with a WiFi network, solving many issues that early IoT pioneers experienced.
1
Add to cart
Add to wishlist
Compare Tags: ESP esp32 ESP8266 nodemcu nodemuc wifi bluetooth wifi development board
Reviews
There are no reviews yet.