-11%
Click to enlarge
5V 1A Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery DIY Power Bank Module in Pakistan Original price was: ₨ 90.Current price is: ₨ 70.
Back to products
Bf350 Strain Gauge Sensor Module Original price was: ₨ 950.Current price is: ₨ 850.

PAM8403 Digital Amplifier with Volume Control

Original price was: ₨ 180.Current price is: ₨ 160.

PAM8403 is a 5V 2x3W Class D amplifier module board with potentiometer (volume control)

Operating Voltage 2.5 ~ 5V
Advanced Micro Devices
Excellent noise suppression in the case is not connected to the input audio, the ear close to the speaker can not hear any noise.
Two-channel stereo, 5V power supply can output 3W +3 W power, can directly drive 4Ω 8Ω small speaker output power, full of energy, good sound quality.
Unique without LC filter Class D digital power board, and can be used directly to the computer’s USB powered.
Dual-panel wiring, properly solve the crosstalk between the ground potential balance and channel wiring.
Ultra-miniature design, can easily be placed in the internal space for a variety of digital products, ultra high zoom efficiency.
All using the machine for the entire board soldering, hand soldering iron welding quality comparable!
Rated working voltage 2.5-5V, limit operating voltage 5.5V

Compare
Add to wishlist
Category:
Description

PAM8403 is a 5V 2x3W Class D amplifier module board with potentiometer (volume control)

Operating Voltage 2.5 ~ 5V
Advanced Micro Devices
Excellent noise suppression in the case is not connected to the input audio, the ear close to the speaker can not hear any noise.
Two-channel stereo, 5V power supply can output 3W +3 W power, can directly drive 4Ω 8Ω small speaker output power, full of energy, good sound quality.
Unique without LC filter Class D digital power board, and can be used directly to the computer’s USB powered.
Dual-panel wiring, properly solve the crosstalk between the ground potential balance and channel wiring.
Ultra-miniature design, can easily be placed in the internal space for a variety of digital products, ultra high zoom efficiency.
All using the machine for the entire board soldering, hand soldering iron welding quality comparable!
Rated working voltage 2.5-5V, limit operating voltage 5.5V

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PAM8403 Digital Amplifier with Volume Control”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

-9%
Compare

Ch340g Usb To Ttl(serial) Converter For Arduino

Original price was: ₨ 220.Current price is: ₨ 200.
This is PL2303 CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc. This USB-TTL converter is based on CH340G USB to Serial TTL converter chip. The module can be used for 3.3V logic level signals, and has the option to switch from 5V to 3.3V logic level using a 2 pin shunt (shortening jumper for specific pins) supplied with the module.
Add to wishlist
Add to cart
Quick view
-8%
Compare

GY-271 HMC5883L Triple Axis Compass Magnetometer Sensor Module in Pakistan

Original price was: ₨ 600.Current price is: ₨ 550.
The GY-271 module is based on the Honeywell HMC5883L IC for low-field magnetic sensing with a digital interface for applications such as lowcost compassing and magnetometry. The HMC5883L includes state-of-theart, high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification, automatic degaussing strap drivers, offset cancellation and a 12-bit ADC that enables.
Add to wishlist
Add to cart
Quick view
-13%
Compare

Mq4 High Sensitivity Gas Methane (cng) Detector Sensor Module

Original price was: ₨ 400.Current price is: ₨ 350.
MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
Add to wishlist
Add to cart
Quick view
-13%
Compare

Mq9 Carbon Monoxide Methane And Lpg Gas Sensor Module In Pakistan

Original price was: ₨ 400.Current price is: ₨ 350.
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module can be use to sense Carbon Monoxide and Metahane Gas. Sensitive material of MQ-9 gas sensor is SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V). The sensor’s conductivity is more higher along with the gas concentration rising. When high temperature (heated by 5.0V), it detects Methane, Propane etc. combustible gas and cleans the other gases adsorbed under low temperature.
Add to wishlist
Add to cart
Quick view
-13%
Compare

NodeMCU Lolin V3 ESP8266 WiFi Microcontroller Module

,
Original price was: ₨ 750.Current price is: ₨ 650.
Arduino-Like Hardware IO Code like Arduino, but interactively in Lua script Event-driven API for network applications, which facilitates developers writing code Integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board 10 GPIO, every GPIO can be PWM, I2C, 1-wire 4M Flash Memory Built-in WiFi Antenna
Add to wishlist
Add to cart
Quick view
-20%
Compare

RS485 to TTL UART Converter Module

Original price was: ₨ 150.Current price is: ₨ 120.
RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan
Add to wishlist
Add to cart
Quick view
-9%
Compare

sp32-cam Wifi + Bluetooth Camera Module Development Board Esp32 With Camera Module Ov2640 For Arduino

,
Original price was: ₨ 1680.Current price is: ₨ 1530.
SP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications. Features: Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module Low-power dual-core 32-bit CPU for application processors Up to 240MHz, up to 600 DMIPS Built-in 520 KB SRAM, external 4M PSRAM Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC Support OV2640 and OV7670 cameras with built-in flash Support for images WiFI upload Support TF card Support multiple sleep modes Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss One-click distribution network Support for serial local upgrade and remote firmware upgrade (FOTA) Support secondary development
Add to wishlist
Add to cart
Quick view
-8%
Compare

WROOM ESP32 Wifi Microcontroller Development

,
Original price was: ₨ 1200.Current price is: ₨ 1100.
ESP32 is a prototyping board that is the work of the Shanghai-based company Espressif Systems. It incorporates the ESP32, a microprocessor tailored toward wearable electronics and IoT. It boasts integrated Wi-Fi and Bluetooth, along with an array of inbuilt antenna switches, and ultra-low power consumption. The company released the ESP8266 chip in 2014. Costing only a few dollars, this small chip is able to bridge an Arduino with a WiFi network, solving many issues that early IoT pioneers experienced. 1 Add to cart Add to wishlist Compare Tags: ESP esp32 ESP8266 nodemcu nodemuc wifi bluetooth wifi development board
Add to wishlist
Add to cart
Quick view