-14%
Click to enlarge
XH-M603 Battery Charge Controller Module Original price was: ₨ 1500.Current price is: ₨ 1200.
Back to products
5A XL4015 Module Adjustable Step Down Buck Converter Original price was: ₨ 450.Current price is: ₨ 400.

XL4015 DC-DC Adjustable Step Down Module

Original price was: ₨ 290.Current price is: ₨ 250.

Input voltage range：4～38VDC(Note: input voltage not exceeding 38V).
Output voltage range：1.25-36VDC adjustable.
Output current: 0-5A.
High efficiency up to 96%.
Output power: 75W.
Built-in thermal shutdown function
Built-in current limit function
In-Built output short protection function
Input reverse polarity protection: None (if required, the high current diode in series with the input).
Power Indicator: Yes
Short circuit protection: Yes (limit current 8A)
Overtemperature protection: (automatically shut off the output after overtemperature)
Input reverse polarity protection: No, (if necessary, please enter the string into the high current diode)
Installation: two 3mm screws
Dimensions(LxWxH): 54 x 23 x 15 mm.

Compare
Add to wishlist
Category:
Description

The XL4015 power module is a DC-to-DC step-down (BUCK Converter) power module with a 180kHz switching frequency. In comparison to low frequency switching regulators, it provides smaller filter components at such a high frequency. This DC-DC switching buck converter has excellent line and load regulation and can drive a 5A load. The XL4015, an adjustable output version switching regulator, is the main switching component. It is a high-efficiency switching regulator, with output efficiency that is much higher than that of common boost regulators. The regulator operates at a switching frequency of 180kHz at higher input voltages, allowing for a reduced overall board size and space savings. It is a high-power switching module with a toroidal ring inductor.

Features
Input voltage: 4 – 38V
Output voltage: 1.25 – 36V (adjustable)
Output current: Maximum output current 5A
Output power: It is recommended to use within 75W
The efficiency of this regulator is up to 96%
Load regulation: 0.8%
Voltage regulation: 0.8%
Adjustable potentiometer onboard for output voltage adjustment.
Power LED indicator
Thermal Protection enabled.
Short circuit proportion: limited to 8A.
Specification
Input Voltage 4V-38V DC
Output Voltage 1.25V-36V DC
Max. Output Current 5A
Load Regulation 0.8%
Voltage Regulation 0.8%
Dimension 54x23x18mm
Country of Origin China

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “XL4015 DC-DC Adjustable Step Down Module”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

-14%
Compare

150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module

Original price was: ₨ 700.Current price is: ₨ 600.
This 150W DC-DC Boost Converter 10-32V to 12-35V module allows you to step up an input voltage as low as 10V and set the output to 12V-35V. The output voltage will be higher than the input voltage. In addition the boost converter design is based on popular Texas Instrument’s UC3844 current mode PWM controller chip.
Add to wishlist
Add to cart
Quick view
-25%
Compare

2 Button Delay Timer Relay Module 12v Dc Adjustable Timer Relay Module In Pakistan

Original price was: ₨ 800.Current price is: ₨ 600.
This is a cycle delay timer module with an LED display. The module adopts MCU as the main chip, so it has high timer precision and reliable performance. Its working voltage is DC 12V and its working current is 50mA. You can use it to control the reciprocating stroke, or repetitive power on and off for equipment and products burn-in tests. Moreover, it can be widely used in timer operating equipment, repetitive testing circuit, and fish tank intermittent pumps. Specifications of 2 Button 12V Dc Programmable Adjustable Timer Relay Module: Product Name: 2 Button 12v Dc Adjustable Timer Relay Module Working voltage: DC 12V Source: DC4V ~ 20V (positive trigger common power button, PNP sensors, PLC signals, etc.) Output capability: You can control the DC 5V~30V 10A & AC 220V 10A Quiescent Current: 20mA, working current: 50mA Life: more than 10 million times; Working temperature: -40 ~ 85’C; Dimensions: 64.2mm * 34.8mm * 18.5mm Features of 12v Dc Digital LED Display Programmable Timer Switch Trigger Cycle Module: anti-reverse voltage input circuit, worry-free wiring. Signal input optocoupler isolation, anti-interference ability. Set the parameters of power and permanent memory. Powerful flash MCU online programming capabilities, according to user needs can contact the manufacturers to customize the functionality. Receives a trigger signal to start the countdown, while the relay, timing the end of the relay to stop working, time to recover to the set, waiting for the next trigger. Instructions of 12v Digital LED Timer Module Adjustable Timer Relay Time Control Switch Trigger Timing Board: Click K1 enter the time setting, one hundred digital starts flashing, then press K2, one hundred the number of changes; then click K1 ten digital start flashing, then press K2, the tens digit changes; then click K1 bit digital start flashing, then press K2, single-digit change; then click K1, exit the setting, LED no longer flashes. Normal digital tube display, press K2, shifting the decimal point, a decimal point indicates 0-999 minutes in 10 bit from 0 to 99.9 seconds with no decimal point represent 0-999 seconds; to this time setting is completed.
Add to wishlist
Add to cart
Quick view
-12%
Compare

2in1 DC 0-100V Voltmeter Ammeter With DC 100A 75mV Ampere Shunt Dual 0.28″ Red Blue Voltage Detector Current Indicator

,
Original price was: ₨ 1700.Current price is: ₨ 1500.
Power Supply (Measure Voltage): DC 4.5-30V Measure Voltage Range:0-100v Measure voltage < 10V,Min Resolution: 0.01V Measure voltage >10V, Min resolution: 0.1V Measure Current: 100A forward current ( more than 10A need shunt) Current Resolution: 0.01A Operating Current: <20mA Display: 0.28 "LED monochrome（red and red) Dimensions: 48 x 29 x 21 mm Cutting Size: 45 x 26 mm Measurement rate: ≥ 500mS / times Accuracy: 1% (± 1 digit ) Operating Temperature: -10°c ~ +65°c Operating Humidity: 10 ~ 80% (non-condensing) Working pressure: 80 ~ 106kP
Add to wishlist
Add to cart
Quick view
-7%
Compare

300w 20a Adjustable Dc-dc Step Down Buck Converter Voltage Regulator Power Supply Module

Original price was: ₨ 1500.Current price is: ₨ 1400.
Adjustable output voltage: 1.2V-36V High current output: 20A Efficient operation with 97% efficiency Low output ripple for stable performance Wide input voltage range: 6-40V Versatile applications for various project
Add to wishlist
Add to cart
Quick view
-14%
Compare

4A Buck Boost Converter Module Adjustable Step Down with LCD Display Power (HW-140)

Original price was: ₨ 1750.Current price is: ₨ 1500.
4A Buck Boost Converter Module Adjustable Step Up and Step Down Function with LCD Display Power (HW-140) Function Description: The module has IN/OUT, ON/OFF two buttons: IN/OUT button switches input voltage and output voltage display, long press can switch output current output power display; ON/OFF button control output ON or OFF, long press can Set the default output status of the next power-on to be ON or OFF. CC is the current setting potentiometer, clockwise rotation, can increase the set current, when the load current reaches the set current, enter the constant current state, the CC constant current indicator (red) lights up; the right CV is the voltage setting The potentiometer rotates clockwise to increase the output voltage. The ON indicator is an output status indicator that lights up when there is voltage at the output, otherwise it is off. Instructions: 1. Use as a common buck-boost module with overcurrent protection (1) Adjust the CV constant voltage device so that the output voltage reaches the voltage you want. (2) Use the multimeter 10A current file to measure the output short-circuit current (directly connect the two test leads to the output terminal), and adjust the CC constant current potentiometer to make the output current reach the predetermined overcurrent protection value. (3)(For example, if the current value displayed by the multimeter is 2A, then the maximum current can only be 2A when you use the module, and the red constant voltage constant current indicator will be on when the current reaches 2A, otherwise the indicator will be off) Note: When using in this state, there is a current sampling resistor at the output, there will be a voltage drop of 0~0.2V after the load is connected, and at the same time, the input wire and the output wire will have a certain line voltage drop when the current is large. This is normal! 2. Use as a battery charger Modules without constant current function cannot be used to charge the battery. Because the voltage difference between the battery and the charger that consumes electricity is too large, the charging current is too large, causing damage to the battery. Therefore, the battery should be used at the beginning. Stream charging, automatically switch back to constant voltage charging when charging to a certain extent electronicstore.pk
Add to wishlist
Add to cart
Quick view
-11%
Compare

Cc-cv Xl4016 9a Dc To Dc Adjustable Buck Converter

Original price was: ₨ 950.Current price is: ₨ 850.
he DC-DC Step-Down 9A XL4016 voltage converter has the function of delivering a constant output voltage lower than the input voltage against variations in the input or load voltage. It supports output currents of up to 9A, input voltage between 8V to 40V and output voltage between 1.25V to 36V. The output voltage is selected by a multiturn potentiometer
Add to wishlist
Add to cart
Quick view
-13%
Compare

XL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)

Original price was: ₨ 230.Current price is: ₨ 200.
XL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A) Xl6009 booster module is a 4A switching current high performance BOOST module, with the third generation of high frequency switch technology as the core chip, the performance is far superior to LM2577. It can be used for booster power supply, DIY adjustable mobile power supply, booster charger, etc.
Add to wishlist
Add to cart
Quick view
-10%
Compare

XL6009 Digital DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)

Original price was: ₨ 500.Current price is: ₨ 450.
L6009 DC-DC Boost Converter 4A Adjustable Step-Up 5-32V to 5V-40V + LED Voltmeter XL6009 is a 4A switch current high performance boost ( BOOST ) module. This module uses the second-generation high-frequency switching technology XL6009E1 as the core chip, and its performance far exceeds that of the first-generation technology LM2577 . The XL6009 booster module has lower cost and better performance, and the LM2577 module is about to be eliminated. Characteristics:
Add to wishlist
Add to cart
Quick view