-14%
360 product view
    Click to enlarge
    MG995 12 kg Servo Motor in Pakistan Original price was: ₨ 950.Current price is: ₨ 850.
    Back to products
    20a Range Current Sensor Module Acs712 In Pakistan Original price was: ₨ 350.Current price is: ₨ 300.

    ACS712 5A 5 Amp Current Sensor Module

    Original price was: ₨ 350.Current price is: ₨ 300.

    The 5A Range Current Sensor Module ACS712 is a versatile and essential component for precise current monitoring in your projects. This high-performance module offers accurate measurements, wide range, and easy integration, making it ideal for various applications.

    Key Features:

    5A Measurement Range: Accurately measures AC or DC currents up to 5A.
    High Accuracy: Provides precise and reliable current readings.
    Easy Integration: Simple to connect to your microcontroller or other devices.
    Versatile Applications: Suitable for over-current protection, battery chargers, and more.
    Compact Design: Small and lightweight for easy installation.
    Specifications:

    Measurement Range: -5A to 5A
    Sensitivity: 66mV/A
    Supply Voltage: 4.5V-5.5V DC
    Dimensions: 31 x 13 x 14 mm
    Weight: 3 gm

    Compare
    Add to wishlist
    Category:
    Description

    The ACS712 module has two phoenix terminal connectors (green colour ones) with mounting screws as shown above. These are the terminals through which the wire has to be passed. In our case I am measuring the current drawn by the motor so the wires that is going to the load (motor) is passed through the ACS 712 Module. Make sure the module is connected in series with the load and be extra cautious to avoid shorts.

    On the other side we have three pins. The Vcc is connected to +5V to power the module and the ground is connected to the ground of the MCU (system). Then the analog voltage given out by the ACS712 module is read using any analog pin on the Microcontroller.

    Pin Configuration
    Pin Number Pin Name Description
    1 Vcc Input voltage is +5V for typical applications
    2 Output Outputs Analog voltage proportional to current
    3 Ground Connected to ground of circuit
    T1 Wire In The wire through current has to be measured is connected here

    T2 Wire Out

    Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “ACS712 5A 5 Amp Current Sensor Module”

    Your email address will not be published. Required fields are marked *

    Shipping & Delivery
    wd-ship-1
    wd-ship-2

    MAECENAS IACULIS

    Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

    ADIPISCING CONVALLIS BULUM

    • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
    • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
    • Diam parturient dictumst parturient scelerisque nibh lectus.

    Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

    Related products

    -8%
    Compare

    Arduino Mega 2560 R3 In Pakistan

    ,
    Original price was: ₨ 4300.Current price is: ₨ 3950.
    The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Uno, Duemilanove or Diecimila.
    Add to wishlist
    Add to cart
    Quick view
    -18%
    Compare

    Cp2102 Usb To Serial Usb To Uart Ttl Serial Module

    Original price was: ₨ 550.Current price is: ₨ 450.
    CP2102 chip from SiLabs is a single-chip USB to UART bridge IC. This cp2102 USB to serial requires minimal external components.CP2102 can be used to migrate legacy serial port based devices to USB.
    Add to wishlist
    Add to cart
    Quick view
    -14%
    Compare

    Mq8 Hydrogen Gas Sensor Module In Pakistan

    Original price was: ₨ 350.Current price is: ₨ 300.
    MQ8 MQ 8 MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection MQ-8 Sensor Hydrogen Gas Sensor Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Using a simple circuit to convert the change in conductivity of the gas concentration corresponding to the output signal. MQ-8 hydrogen gas sensor of high sensitivity, the monitoring of the other hydrogen-containing gas is also very satisfactory. This sensor can detect a wide range of hydrogen gas, city gas, in particular, is a low-cost sensor for a variety of applications.
    Add to wishlist
    Add to cart
    Quick view
    -13%
    Compare

    Mq9 Carbon Monoxide Methane And Lpg Gas Sensor Module In Pakistan

    Original price was: ₨ 400.Current price is: ₨ 350.
    MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module can be use to sense Carbon Monoxide and Metahane Gas. Sensitive material of MQ-9 gas sensor is SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V). The sensor’s conductivity is more higher along with the gas concentration rising. When high temperature (heated by 5.0V), it detects Methane, Propane etc. combustible gas and cleans the other gases adsorbed under low temperature.
    Add to wishlist
    Add to cart
    Quick view
    -13%
    Compare

    NodeMCU Lolin V3 ESP8266 WiFi Microcontroller Module

    ,
    Original price was: ₨ 750.Current price is: ₨ 650.
    Arduino-Like Hardware IO Code like Arduino, but interactively in Lua script Event-driven API for network applications, which facilitates developers writing code Integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board 10 GPIO, every GPIO can be PWM, I2C, 1-wire 4M Flash Memory Built-in WiFi Antenna
    Add to wishlist
    Add to cart
    Quick view
    -20%
    Compare

    RS485 to TTL UART Converter Module

    Original price was: ₨ 150.Current price is: ₨ 120.
    RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan
    Add to wishlist
    Add to cart
    Quick view
    -9%
    Compare

    sp32-cam Wifi + Bluetooth Camera Module Development Board Esp32 With Camera Module Ov2640 For Arduino

    ,
    Original price was: ₨ 1680.Current price is: ₨ 1530.
    SP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications. Features: Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module Low-power dual-core 32-bit CPU for application processors Up to 240MHz, up to 600 DMIPS Built-in 520 KB SRAM, external 4M PSRAM Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC Support OV2640 and OV7670 cameras with built-in flash Support for images WiFI upload Support TF card Support multiple sleep modes Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss One-click distribution network Support for serial local upgrade and remote firmware upgrade (FOTA) Support secondary development
    Add to wishlist
    Add to cart
    Quick view
    -10%
    Compare

    USB to RS485 / USB 2.0 to RS 485 Serial Converter Adapter

    Original price was: ₨ 300.Current price is: ₨ 270.
    The USB to RS485 Converter Adapter module support WIN7 XP Vista Linux Mac OS provides an easy-to-use RS485 interface by means of a Virtual Com Port on the user’s system. There are no command structures, whatever is sent to the Virtual Comm Port is automatically converted to RS485 and vice versa. The module is completely self-powered from the USB bus. Controlling / Communicating with RS-485 devices from your PC has never been easier! This device is plug-and-play. It shows up as a serial/com port and is accessible from applications or hyper-terminal.
    Add to wishlist
    Add to cart
    Quick view