Features:
Sensitive for LPG, propane, hydrogen
Output voltage boosts along with the concentration of the measured gases increases
Fast response and recovery
Features boost circuit
Adjustable sensitivity
Signal output indicator
Pin Configuration:
Pin No: Pin Name: Description
For Module
1 Vcc This pin powers the module, typically the operating voltage is +5V
2 Ground Used to connect the module to system ground
3 Digital Out You can also use this sensor to get digital output from this pin, by setting a threshold value using the potentiometer
4 Analog Out This pin outputs 0-5V analog voltage based on the intensity of the gas
For Sensor
1 H -Pins Out of the two H pins, one pin is connected to supply and the other to ground
2 A-Pins The A pins and B pins are interchangeable. These pins will be tied to the Supply voltage.
3 B-Pins The A pins and B pins are interchangeable. One pin will act as output while the other will be pulled to ground.
Applications
Gas leakage detector
SKU: 0125 Categories: Gas Sensors, Modules and Breakout Boards, Sensors & Transducers Tags: Alcohol, Benzene, detector, Gas, module, MQ-2, Sensor, Smoke
Description
Specification
Operating Voltage is +5V
Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even Methane
Sensitive for LPG, propane, hydrogen
Analog output voltage: 0V to 5V
Digital Output Voltage: 0V or 5V (TTL Logic)
Preheat duration 20 seconds
Can be used as a Digital or analog sensor
The Sensitivity of Digital pin can be varied using the potentiometer
-14%
0%
XL6009E1 1.3-35V 3A Auto Step Up/Down Buck/Boost DC-DC Converter
Original price was: ₨ 400.₨ 370Current price is: ₨ 370.
Mq3 Alcohol Sensor Detector Gas Sensor Module In Pakistan
Original price was: ₨ 400.₨ 300Current price is: ₨ 300.
Mq2 Gas Sensor Detector Module In Pakistan
Original price was: ₨ 350.₨ 300Current price is: ₨ 300.
| Weight | 300 kg |
|---|
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
ESP32 WROOM-32 38-pins Wifi+Bluetooth MCU Module
ESP32 WROOM-32 38-pins Wifi+Bluetooth MCU Module
This is ESP WROOM 32/ ESP32 Wi-Fi-BT-BLE MCU Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding.
At the core of this module is the ESP32 chip, which is designed to be scalable and adaptive. There are 2 CPU cores that can be individually controlled or powered, and the clock frequency is adjustable from 80 MHz to 240 MH
MAX6675 Module + K Type Thermocouple
This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. This sensor is available at electronicstore.pk shop online in Pakistan.
Mq4 High Sensitivity Gas Methane (cng) Detector Sensor Module
MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
RS485 to TTL UART Converter Module
RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan
USB to RS485 / USB 2.0 to RS 485 Serial Converter Adapter
The USB to RS485 Converter Adapter module support WIN7 XP Vista Linux Mac OS provides an easy-to-use RS485 interface by means of a Virtual Com Port on the user’s system. There are no command structures, whatever is sent to the Virtual Comm Port is automatically converted to RS485 and vice versa. The module is completely self-powered from the USB bus. Controlling / Communicating with RS-485 devices from your PC has never been easier! This device is plug-and-play. It shows up as a serial/com port and is accessible from applications or hyper-terminal.
Reviews
There are no reviews yet.